dpt sensor differential pressure sensor
Description
The differential pressure transmitter utilizes the piezoresistive
effect of the silicon conductor of the differential pressure sensor
to realize the conversion of the differential pressure and the
electrical signal.
Because the signal output by the Wheatstone bridge on the sensitive
chip has a good linear relationship with the differential pressure,
the accurate measurement of the measured differential pressure can
be realized.
Differential pressure transmitter is widely used in industrial
process control, flow measurement, medical instruments, aerodynamic
measurement, hydraulic, pneumatic equipment and other fields.
The differential pressure transmitter is mainly used for the
measurement of differential pressure, liquid level and flow.
In petroleum and petrochemical industry, differential pressure,
liquid level and flow are very important parameters, so
differential pressure transmitter can realize local display, remote
monitoring, control, alarm and other functions.
Feature
- Ranges from -25/+25Pa to -10000/+10000Pa (according to models)
- Auto zero manual calibration
- Voltage, current, digital signal output
- Standard accuracy <±1% FS
- IP65 house protection
- When ≤100Pa,accuracy＜±3%FS±2Pa
Application
- HVAC system
- Pharmaceutical clean rooms
- Electronic clean rooms
- Medical clean rooms
- Commercial buildings
- Public transport hub
Technical data
| Model | KDP110 |
| Measurement Units | Pa,mmH2O,inWG,mmHG,KPa,mbar |
| Accuracy | <±1% FS@-5 to +65℃ |
| Response Time | 0.5s |
| Repeat Stability | ±0.01 % at FS /Year |
| Resolution | 0.1 Pa; 0.1 mmH2O; 0.01mbar; 0.01mmHG |
| Media | Air and neutral gases |
| Operating Temperature | -20…+70℃ |
| Storage Temperature | -40…+60℃ |
| Power Consumption | ＜1.5W |
| Tolerated over pressure | x15 |
| Power Supply | 16~30VAC/DC (3wire) / 18~30VDC (2wire) |
| Output Signal | 4-20mA(2wire) |
| 4-20mA(3wire) |
| 0~5V/0~10VDC(3wire) |
| RS-485 |
| Customized |
| Auto Zero | Manual calibration |
| Housing Material | PC&ABS,UL94V-0 |
| Protection Class | IP65/NEMA4 |
| Cable Gland | M16*1.5 |
Dimension
Measuring range adjustment
Output setting(3 wire Model)
Manual Zero-point correction
Ordering guide
KDP110-Range-Output
| Model | Range | Output |
| KDP110 | -100~+100Pa | (1) | 4-20mA(2 wire) | (E) |
| -1000~+1000Pa | (2) | 4-20mA(3 wire) | (F) |
| -2000~+2000Pa | (3) | 0-5/0-10V(3 wire) | (G) |
| -10000~+10000Pa | (4) | RS-485 | (H) |
| | Customized | |
